1. Good appearance, easy to carry and hold. Simple and convenient to use.

2. Big screen, and large font. Test result, test frequency, temperature, temperature coefficient, and other important parameters can be displayedat the same time

3. Measurement range0.51~112%IACS or 0.3~65MS/m covered all non-ferrous metal materials.

4. Backlight lighting design is convenient for testing data read in low light conditions.

5. With two kinds ofswitchable working frequency, 60 KHz is for aviation industry standard, 500 KHz is for testing sheet material. 

6. With a diameter of 8 mm and 14 mm diameter of probe, adapt to big or small workpiece

7. Instrument has the function of curvature calibration, and accompanied with ∧ probe sets, can detect surface materials.

8. Instrument with continuous detection function, can set upper and lower alarm, and rapid materials sorting.

9. Unique temperature coefficient setting and the design of the automatic calibration, make the equipment operation more concise and reliable.

10. With lift-off compensation as high as 0.5 mm, can be used to measure the workpiece with non-conductive thin layer of paint, plastic mould, etc. and ensure measurement accuracy.

11. Multiple temperature compensation pattern design, combined with the temperature coefficient of the specimens, can ensure measurement accuracy at different test temperatures.

12. Detection probes are interchangeable, user can replace with the probe provided byour company without matching.

13. A built-in data memory, which can record 500 sets of test data and important test parameters, can connect the computer to generate a complete report.

14. Two units of measurement (MS/m or % IACS) convenient for selecting, at the same time also can directly switch resistivity values in measuring interface.

15. Three languages: simplified Chinese, Japanese and English.

Operating temperature：0～50℃

Storage temperature：-20℃～90℃

Relative humidity：0～85%（No condensation）

Operating voltage：charger of AC220±10V